Skip to main content

Advertisement

Table 3 Output results of the trained neural network model

From: Optimal selection of operating parameters in end milling of Al-6061 work materials using multi-objective approach

Case Inputs Outputs
  f in mm/min N in rpm b in mm Amplitude of vibration(A) in mv Surface roughness (Ra) in μm
     Initial Value RBF Value % error Initial Value RBF Value % error
1 20 1800 0.5 0.064 0.06479 0.005 0.8 0.824 0.0002
2 20 3000 0.5 0.1128 0.1228 0.001 2.2 1.45 0.07
3 40 1800 0.2 0.1462 0.1189 0.002 0.2 0.49 0.002
4 40 3000 0.8 0.0896 0.0912 0.0001 1.73 1.56 0.0017
5 40 2400 0.5 0.0752 0.074 0.0001 1.2 0.95 0.002