TY - JOUR AU - Al-Ahmari, A. M. A. PY - 2007 DA - 2007// TI - Predictive machinability models for a selected hard material in turning operations JO - J Mater Process Technol VL - 190 UR - https://doi.org/10.1016/j.jmatprotec.2007.02.031 DO - 10.1016/j.jmatprotec.2007.02.031 ID - Al-Ahmari2007 ER - TY - JOUR AU - Aneiro, F. M. AU - Coelho, R. T. AU - Brandão, L. C. PY - 2008 DA - 2008// TI - Turning hardened steel using coated carbide at high cutting speeds JO - J Braz Soc Mech Sci Eng VL - 30 UR - https://doi.org/10.1590/S1678-58782008000200002 DO - 10.1590/S1678-58782008000200002 ID - Aneiro2008 ER - TY - JOUR AU - Aouici, H. AU - Yallese, M. A. AU - Fnides, B. AU - Chaoui, K. AU - Mabrouki, T. PY - 2011 DA - 2011// TI - Modeling and optimization of hard turning of X38CrMoV5-1 steel with CBN tool: machining parameters effects on flank wear and surface roughness JO - J Mech Sci Technol VL - 25 UR - https://doi.org/10.1007/s12206-011-0807-z DO - 10.1007/s12206-011-0807-z ID - Aouici2011 ER - TY - JOUR AU - Aouici, H. AU - Bouchelaghem, H. AU - Yallese, M. A. AU - Elbah, M. AU - Fnides, B. PY - 2014 DA - 2014// TI - Machinability investigation in hard turning of AISI D3 cold work steel with ceramic tool using response surface methodology JO - Int J Adv Manuf Technol VL - 73 UR - https://doi.org/10.1007/s00170-014-5950-0 DO - 10.1007/s00170-014-5950-0 ID - Aouici2014 ER - TY - JOUR AU - Asiltürk, I. AU - Akkus, H. PY - 2011 DA - 2011// TI - Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method JO - Measurement VL - 44 ID - Asiltürk2011 ER - TY - JOUR AU - Asiltürk, I. AU - Çunkaş, M. PY - 2011 DA - 2011// TI - Modeling and prediction of surface roughness in turning operations using artificial neural network and multiple regression method JO - Expert Syst Appl VL - 38 UR - https://doi.org/10.1016/j.eswa.2010.11.041 DO - 10.1016/j.eswa.2010.11.041 ID - Asiltürk2011 ER - TY - JOUR AU - Aslan, E. AU - Camuscu, N. AU - Bingoren, B. PY - 2007 DA - 2007// TI - Design optimization of cutting parameters when turning hardened AISI 4140 (63 HRC) with Al2O3 + TiCN mixed ceramic tool JO - Mater Des VL - 28 UR - https://doi.org/10.1016/j.matdes.2006.02.006 DO - 10.1016/j.matdes.2006.02.006 ID - Aslan2007 ER - TY - JOUR AU - Bartarya, G. AU - Choudhury, S. K. PY - 2012 DA - 2012// TI - Effect of cutting parameters on cutting force and surface roughness during finish hard turning AISI52100 grade steel JO - Procedia CIRP VL - 1 UR - https://doi.org/10.1016/j.procir.2012.05.016 DO - 10.1016/j.procir.2012.05.016 ID - Bartarya2012 ER - TY - JOUR AU - Basavarajappa, S. AU - Suresh, R. AU - Gaitonde, V. N. AU - Samuel, G. L. PY - 2014 DA - 2014// TI - Analysis of cutting forces and surface roughness in hard turning of AISI 4340 using multilayer coated carbide tool JO - Int J Machining Machinability Mater VL - 16 UR - https://doi.org/10.1504/IJMMM.2014.064687 DO - 10.1504/IJMMM.2014.064687 ID - Basavarajappa2014 ER - TY - JOUR AU - Bensouilah, H. AU - Aouici, H. AU - Meddour, I. AU - Yallese, M. A. AU - Mabrouki, T. AU - Girardin, F. PY - 2016 DA - 2016// TI - Performance of coated and uncoated mixed ceramic tools in hard turning process JO - Measurement VL - 82 UR - https://doi.org/10.1016/j.measurement.2015.11.042 DO - 10.1016/j.measurement.2015.11.042 ID - Bensouilah2016 ER - TY - JOUR AU - Bouacha, K. AU - Terrab, A. PY - 2016 DA - 2016// TI - Hard turning behavior improvement using NSGA-II and PSO-NN hybrid model JO - Int J Adv Manuf Technol VL - 86 UR - https://doi.org/10.1007/s00170-016-8479-6 DO - 10.1007/s00170-016-8479-6 ID - Bouacha2016 ER - TY - JOUR AU - Bouacha, K. AU - Yallese, M. A. AU - Mabrouki, T. AU - Rigal, J. F. PY - 2010 DA - 2010// TI - Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool JO - Int J Refract Met Hard Mat VL - 28 UR - https://doi.org/10.1016/j.ijrmhm.2009.11.011 DO - 10.1016/j.ijrmhm.2009.11.011 ID - Bouacha2010 ER - TY - JOUR AU - Bouacha, K. AU - Yallese, M. A. AU - Khamel, S. AU - Belhadi, S. PY - 2014 DA - 2014// TI - Analysis and optimization of hard turning operation using cubic boron nitride tool JO - Int J Refract Met Hard Mater VL - 45 UR - https://doi.org/10.1016/j.ijrmhm.2014.04.014 DO - 10.1016/j.ijrmhm.2014.04.014 ID - Bouacha2014 ER - TY - JOUR AU - Bouchelaghem, H. AU - Yallese, M. A. AU - Mabrouki, T. AU - Amirat, A. AU - Rigal, J. F. PY - 2010 DA - 2010// TI - Experimental investigation and performance analyses of CBN insert in hard turning of cold work tool steel (D3) JO - Machining Sci Technol VL - 14 UR - https://doi.org/10.1080/10910344.2010.533621 DO - 10.1080/10910344.2010.533621 ID - Bouchelaghem2010 ER - TY - JOUR AU - Bouzid, l. AU - Yallese, M. A. AU - Belhadi, S. PY - 2014 DA - 2014// TI - RMS-based optimisation of surface roughness when turning AISI 420 stainless steel JO - Int J Mater Prod Technol VL - 49 UR - https://doi.org/10.1504/IJMPT.2014.064934 DO - 10.1504/IJMPT.2014.064934 ID - Bouzid2014 ER - TY - JOUR AU - Bouzid, L. AU - Yallese, M. A. AU - Chaoui, K. AU - Mabrouki, T. AU - Boulanouar, L. PY - 2014 DA - 2014// TI - Mathematical modeling for turning on AISI 420 stainless steel using surface response methodology JO - J Eng Manuf VL - 229 UR - https://doi.org/10.1177/0954405414526385 DO - 10.1177/0954405414526385 ID - Bouzid2014 ER - TY - JOUR AU - Cakir, M. C. AU - Ensarioglu, C. AU - Demirayak, I. PY - 2009 DA - 2009// TI - Mathematical modeling of surface roughness for evaluating the effects of cutting parameters and coating material JO - J Mater Process Technol VL - 209 UR - https://doi.org/10.1016/j.jmatprotec.2008.01.050 DO - 10.1016/j.jmatprotec.2008.01.050 ID - Cakir2009 ER - TY - JOUR AU - Caydas, U. PY - 2010 DA - 2010// TI - Machinability evaluation in hard turning of AISI 4340 steel with different cutting tools using statistical techniques JO - J Eng Manuf VL - 224 UR - https://doi.org/10.1243/09544054JEM1822 DO - 10.1243/09544054JEM1822 ID - Caydas2010 ER - TY - JOUR AU - Chinchanikar, S. AU - Choudhury, S. K. PY - 2013 DA - 2013// TI - Effect of work material hardness and cutting parameters on performance of coated carbide tool when turning hardened steel: An optimization approach JO - Measurement VL - 46 UR - https://doi.org/10.1016/j.measurement.2012.11.032 DO - 10.1016/j.measurement.2012.11.032 ID - Chinchanikar2013 ER - TY - JOUR AU - Chinchanikar, S. AU - Choudhury, S. K. PY - 2013 DA - 2013// TI - Investigations on machinability aspects of hardened AISI 4340 steel at different levels of hardness using coated carbide tools JO - Int J Refract Met Hard Mater VL - 38 UR - https://doi.org/10.1016/j.ijrmhm.2013.01.013 DO - 10.1016/j.ijrmhm.2013.01.013 ID - Chinchanikar2013 ER - TY - JOUR AU - Chinchanikar, S. AU - Choudhury, S. K. PY - 2015 DA - 2015// TI - Machining of hardened steel-Experimental investigations, performance modeling and cooling techniques: a review JO - Int J Machine Tools Manuf VL - 89 UR - https://doi.org/10.1016/j.ijmachtools.2014.11.002 DO - 10.1016/j.ijmachtools.2014.11.002 ID - Chinchanikar2015 ER - TY - JOUR AU - Chinchanikar, S. AU - Choudhury, S. K. PY - 2015 DA - 2015// TI - Predictive modeling for flank wear progression of coated carbide tool in turning hardened steel under practical machining conditions JO - Int J Adv Manuf Technol VL - 76 UR - https://doi.org/10.1007/s00170-014-6285-6 DO - 10.1007/s00170-014-6285-6 ID - Chinchanikar2015 ER - TY - JOUR AU - Das, S. R. AU - Dhupal, D. AU - Kumar, A. PY - 2015 DA - 2015// TI - Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts JO - J Mech Sci Technol VL - 29 UR - https://doi.org/10.1007/s12206-015-0931-2 DO - 10.1007/s12206-015-0931-2 ID - Das2015 ER - TY - JOUR AU - Das, A. AU - Mukhopadhyay, A. AU - Patel, S. K. AU - Biswal, B. B. PY - 2016 DA - 2016// TI - Comparative assessment on machinability aspects of AISI 4340 alloy steel using uncoated carbide and coated cermet inserts during hard turning JO - Arabian J Sci Eng VL - 41 UR - https://doi.org/10.1007/s13369-016-2160-0 DO - 10.1007/s13369-016-2160-0 ID - Das2016 ER - TY - JOUR AU - Davim, J. P. AU - Figueira, L. PY - 2007 DA - 2007// TI - Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques JO - Mater Des VL - 28 UR - https://doi.org/10.1016/j.matdes.2006.01.011 DO - 10.1016/j.matdes.2006.01.011 ID - Davim2007 ER - TY - JOUR AU - Dogra, M. AU - Sharma, V. S. AU - Sachdeva, A. AU - Suri, N. M. AU - Dureja, J. S. PY - 2010 DA - 2010// TI - Tool wear, chip formation and workpiece surface issues in CBN hard turning: a review JO - Int J Precision Eng Manuf VL - 11 UR - https://doi.org/10.1007/s12541-010-0040-1 DO - 10.1007/s12541-010-0040-1 ID - Dogra2010 ER - TY - JOUR AU - Dogra, M. AU - Sharma, V. S. AU - Sachdeva, A. AU - Suri, N. M. PY - 2011 DA - 2011// TI - Tool life and surface integrity issues in continuous and interrupted finish hard turning with coated carbide and CBN tools JO - J Eng Manuf VL - 226 UR - https://doi.org/10.1177/0954405411418589 DO - 10.1177/0954405411418589 ID - Dogra2011 ER - TY - JOUR AU - Dureja, J. S. AU - Gupta, V. K. AU - Sharma, V. S. PY - 2010 DA - 2010// TI - Design optimization of flank wear and surface roughness for CBN-TiN tools during dry hard turning of hot work die steel JO - Int J Machining Machinability Mater VL - 7 UR - https://doi.org/10.1504/IJMMM.2010.029850 DO - 10.1504/IJMMM.2010.029850 ID - Dureja2010 ER - TY - JOUR AU - Dureja, J. S. AU - Singha, R. AU - Bhatti, M. S. PY - 2014 DA - 2014// TI - Optimizing flank wear and surface roughness during hard turning of AISI D3 steel by Taguchi and RSM methods JO - Prod Manuf Res VL - 2 ID - Dureja2014 ER - TY - JOUR AU - Elmunafi, M. H. S. AU - Yusof, N. M. AU - Kurniawan, D. PY - 2015 DA - 2015// TI - Effect of cutting speed and feed in turning hardened stainless steel using coated carbide cutting tool under minimum quantity lubrication using castor oil JO - Adv Mech Eng VL - 7 UR - https://doi.org/10.1177/1687814015600666 DO - 10.1177/1687814015600666 ID - Elmunafi2015 ER - TY - JOUR AU - Fnides, B. AU - Aouici, H. AU - Yallese, M. A. PY - 2008 DA - 2008// TI - Cutting forces and surface roughness in hard turning of hot work steel X38CrMoV5-1 using mixed ceramic JO - Mechanika VL - 70 ID - Fnides2008 ER - TY - JOUR AU - Gaitonde, V. N. AU - Karnik, S. R. AU - Figueira, L. AU - Davim, J. P. PY - 2009 DA - 2009// TI - Analysis of machinability during hard turning of cold work tool steel (Type: AISI D2) JO - J Mater Process Technol VL - 24 UR - https://doi.org/10.1080/10426910902997415 DO - 10.1080/10426910902997415 ID - Gaitonde2009 ER - TY - JOUR AU - Hessainia, Z. AU - Belbah, A. AU - Yallese, M. A. AU - Mabrouki, T. AU - Rigal, J. F. PY - 2013 DA - 2013// TI - On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrations JO - Measurement VL - 46 UR - https://doi.org/10.1016/j.measurement.2012.12.016 DO - 10.1016/j.measurement.2012.12.016 ID - Hessainia2013 ER - TY - JOUR AU - Hessainia, Z. AU - Yallese, M. A. AU - Bouzid, L. AU - Mabrouki, T. PY - 2015 DA - 2015// TI - On the application of response surface methodology for predicting and optimizing surface roughness and cutting forces in hard turning by PVD coated insert JO - Int J Ind Eng Computations VL - 6 UR - https://doi.org/10.5267/j.ijiec.2014.10.003 DO - 10.5267/j.ijiec.2014.10.003 ID - Hessainia2015 ER - TY - JOUR AU - Horng, J. T. AU - Liu, N. M. AU - Chiang, K. Y. PY - 2008 DA - 2008// TI - Investigating the machinability evaluation of Hadfield steel in the hard turning with Al2O3/TiC mixed ceramic tool based on the response surface methodology JO - J Mater Process Technol VL - 208 UR - https://doi.org/10.1016/j.jmatprotec.2008.01.018 DO - 10.1016/j.jmatprotec.2008.01.018 ID - Horng2008 ER - TY - JOUR AU - Hosseini, A. AU - Hussein, H. M. AU - Kishawy, H. A. PY - 2016 DA - 2016// TI - On the machinability of die/mold D2 steel material JO - Int J Adv Manuf Technol VL - 85 UR - https://doi.org/10.1007/s00170-015-7971-8 DO - 10.1007/s00170-015-7971-8 ID - Hosseini2016 ER - TY - JOUR AU - Kaplan, Y. AU - Okay, S. AU - Motorcu, A. R. AU - Nalbant, M. PY - 2014 DA - 2014// TI - Investigation of the effects of machining parameters on the thrust force and cutting torque in the drilling of AISI D2 and AISI D3 cold work tool steels JO - Indian J Eng Mater Sci VL - 21 ID - Kaplan2014 ER - TY - JOUR AU - Khamel, S. AU - Ouelaa, N. AU - Bouacha, K. PY - 2012 DA - 2012// TI - Analysis and prediction of tool wear, surface roughness and cutting forces in hard turning with CBN tool JO - J Mech Sci Technol VL - 26 UR - https://doi.org/10.1007/s12206-012-0853-1 DO - 10.1007/s12206-012-0853-1 ID - Khamel2012 ER - TY - JOUR AU - Konig, W. AU - Klinger, M. AU - Link, R. PY - 1990 DA - 1990// TI - Machining hard materials with geometrically defined cutting edge - Field of applications and limitations JO - CIRP Ann Manuf Technol VL - 39 UR - https://doi.org/10.1016/S0007-8506(07)61003-8 DO - 10.1016/S0007-8506(07)61003-8 ID - Konig1990 ER - TY - JOUR AU - Lalwani, D. I. AU - Mehta, N. K. AU - Jain, P. K. PY - 2008 DA - 2008// TI - Experimental investigations of cutting parameters influence on cutting forces and surface roughness in finish hard turning of MDN250 steel JO - J Mater Process Technol VL - 206 UR - https://doi.org/10.1016/j.jmatprotec.2007.12.018 DO - 10.1016/j.jmatprotec.2007.12.018 ID - Lalwani2008 ER - TY - JOUR AU - Lima, J. G. AU - Avila, R. F. AU - Abrao, A. M. AU - Faustino, M. AU - Davim, J. P. PY - 2005 DA - 2005// TI - Hard turning: AISI 4340 high strength low alloy steel and AISI D2 cold work tool steel JO - J Mater Process Technol VL - 169 UR - https://doi.org/10.1016/j.jmatprotec.2005.04.082 DO - 10.1016/j.jmatprotec.2005.04.082 ID - Lima2005 ER - TY - JOUR AU - Meddour, I. AU - Yallese, M. A. AU - Khattabi, R. AU - Elbah, M. AU - Boulanour, L. PY - 2015 DA - 2015// TI - Investigating and modeling of cutting forces and surface roughness when hard turning of AISI 52100 steel with mixed ceramic tool: cutting conditions optimization JO - Int J Adv Manuf Technol VL - 77 UR - https://doi.org/10.1007/s00170-014-6559-z DO - 10.1007/s00170-014-6559-z ID - Meddour2015 ER - TY - JOUR AU - Mohanty, C. P. AU - Mahapatra, S. S. AU - Singh, M. R. PY - 2016 DA - 2016// TI - A particle swarm approach for multi-objective optimization of electrical discharge machining process JO - J Intell Manuf VL - 27 UR - https://doi.org/10.1007/s10845-014-0942-3 DO - 10.1007/s10845-014-0942-3 ID - Mohanty2016 ER - TY - STD TI - Mohanty CP, Mahapatra SS, Singh MR (2017) An intelligent approach to optimize the EDM process parameters using utility concept and QPSO algorithm. Eng Sci Technol 20:552–562 ID - ref44 ER - TY - BOOK AU - Montgomery, D. C. PY - 2004 DA - 2004// TI - Design and analysis of experiments PB - Sons CY - New York ID - Montgomery2004 ER - TY - JOUR AU - More, A. S. AU - Jiang, W. AU - Brown, W. D. AU - Malshe, A. P. PY - 2006 DA - 2006// TI - Tool wear and machining performance of cBN–TiN coated carbide inserts and PCBN compact inserts in turning AISI 4340 hardened steel JO - J Mater Process Technol VL - 180 UR - https://doi.org/10.1016/j.jmatprotec.2006.06.013 DO - 10.1016/j.jmatprotec.2006.06.013 ID - More2006 ER - TY - JOUR AU - Nabil, K. AU - Zahia, H. AU - Yallese, M. A. AU - Ouelaa, N. PY - 2012 DA - 2012// TI - Statistical analysis of surface roughness by design of experiments in hard turning JO - Mechanika VL - 18 UR - https://doi.org/10.5755/j01.mech.18.5.2704 DO - 10.5755/j01.mech.18.5.2704 ID - Nabil2012 ER - TY - JOUR AU - Nayak, M. AU - Sehgal, R. PY - 2015 DA - 2015// TI - Effect of tool material properties and cutting conditions on machinability of AISI D6 steel during hard turning JO - Arabian J Sci Eng VL - 40 UR - https://doi.org/10.1007/s13369-015-1578-0 DO - 10.1007/s13369-015-1578-0 ID - Nayak2015 ER - TY - JOUR AU - Neslusan, M. AU - Sípek, M. AU - Mrazik, J. PY - 2012 DA - 2012// TI - Analysis of chip formation during hard turning through acoustic emission JO - Mater Eng VL - 19 ID - Neslusan2012 ER - TY - JOUR AU - Ozel, T. AU - Karpat, Y. AU - Figueira, L. AU - Davim, J. P. PY - 2007 DA - 2007// TI - Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts JO - J Mater Process Technol VL - 189 UR - https://doi.org/10.1016/j.jmatprotec.2007.01.021 DO - 10.1016/j.jmatprotec.2007.01.021 ID - Ozel2007 ER - TY - JOUR AU - Pal, A. AU - Choudhury, S. K. AU - Chinchanikar, S. PY - 2014 DA - 2014// TI - Machinability assessment through experimental investigation during hard and soft turning of hardened steel JO - Procedia Mater Sci VL - 6 UR - https://doi.org/10.1016/j.mspro.2014.07.010 DO - 10.1016/j.mspro.2014.07.010 ID - Pal2014 ER - TY - JOUR AU - Panda, A. AU - Sahoo, A. K. AU - Rout, A. K. PY - 2016 DA - 2016// TI - Investigations on surface quality characteristics with multi-response parametric optimization and correlations JO - Alex Eng J VL - 55 UR - https://doi.org/10.1016/j.aej.2016.02.008 DO - 10.1016/j.aej.2016.02.008 ID - Panda2016 ER - TY - JOUR AU - Rech, J. AU - Moisan, A. PY - 2003 DA - 2003// TI - Surface integrity in finish hard turning of case-hardened steels JO - Int J Machine Tools Manuf VL - 43 UR - https://doi.org/10.1016/S0890-6955(02)00141-4 DO - 10.1016/S0890-6955(02)00141-4 ID - Rech2003 ER - TY - BOOK AU - Roy, R. PY - 1990 DA - 1990// TI - A primer on the taguchi method PB - SME CY - Dearborn ID - Roy1990 ER - TY - JOUR AU - Sahoo, A. K. AU - Sahoo, B. PY - 2012 DA - 2012// TI - Experimental investigations on machinability aspects in finish hard turning of AISI 4340 steel using uncoated and multilayer coated carbide inserts JO - Measurement VL - 45 UR - https://doi.org/10.1016/j.measurement.2012.05.015 DO - 10.1016/j.measurement.2012.05.015 ID - Sahoo2012 ER - TY - JOUR AU - Sahoo, A. K. AU - Sahoo, B. PY - 2013 DA - 2013// TI - Performance studies of multilayer hard surface coatings (TiN/TiCN/Al2O3/TiN) of indexable carbide inserts in hard machining: Part-II (RSM, grey relational and techno economical approach) JO - Measurement VL - 46 UR - https://doi.org/10.1016/j.measurement.2012.09.023 DO - 10.1016/j.measurement.2012.09.023 ID - Sahoo2013 ER - TY - JOUR AU - Sahu, S. K. AU - Mishra, P. C. AU - Orra, K. AU - Sahoo, A. K. PY - 2014 DA - 2014// TI - Performance assessment in hard turning of AISI 1015 steel under spray impingement cooling and dry environment JO - J Eng Manuf VL - 229 UR - https://doi.org/10.1177/0954405414528165 DO - 10.1177/0954405414528165 ID - Sahu2014 ER - TY - JOUR AU - Saini, S. AU - Ahuja, I. S. AU - Sharma, V. S. PY - 2012 DA - 2012// TI - Influence of cutting parameters on tool wear and surface roughness in hard turning of AISI H11 tool steel using ceramic tools JO - Int J Precision Eng Manuf VL - 13 UR - https://doi.org/10.1007/s12541-012-0172-6 DO - 10.1007/s12541-012-0172-6 ID - Saini2012 ER - TY - JOUR AU - Senthilkumar, N. AU - Tamizharasan, T. AU - Anandakrishnan, V. PY - 2014 DA - 2014// TI - Experimental investigation and performance analysis of cemented carbide inserts of different geometries using Taguchi based grey relational analysis JO - Measurement VL - 58 UR - https://doi.org/10.1016/j.measurement.2014.09.025 DO - 10.1016/j.measurement.2014.09.025 ID - Senthilkumar2014 ER - TY - BOOK AU - Shaw, M. C. PY - 2005 DA - 2005// TI - Metal cutting principles PB - Oxford University Press CY - New York ID - Shaw2005 ER - TY - JOUR AU - Shihab, S. K. AU - Khan, Z. A. AU - Mohammad, A. AU - Siddiquee, A. N. PY - 2014 DA - 2014// TI - Optimization of surface integrity in dry hard turning using RSM JO - Sadhana VL - 39 UR - https://doi.org/10.1007/s12046-014-0263-4 DO - 10.1007/s12046-014-0263-4 ID - Shihab2014 ER - TY - JOUR AU - Sieben, B. AU - Wagner, T. AU - Biermann, D. PY - 2010 DA - 2010// TI - Empirical modeling of hard turning of AISI 6150 steel using design and analysis of computer experiments JO - Prod Eng Res Dev VL - 4 UR - https://doi.org/10.1007/s11740-010-0208-7 DO - 10.1007/s11740-010-0208-7 ID - Sieben2010 ER - TY - JOUR AU - Singh, D. AU - Rao, P. V. PY - 2007 DA - 2007// TI - A surface roughness prediction model for hard turning process JO - Int J Adv Manuf Technol VL - 32 UR - https://doi.org/10.1007/s00170-006-0429-2 DO - 10.1007/s00170-006-0429-2 ID - Singh2007 ER - TY - JOUR AU - Sobiyi, K. AU - Sigalas, I. PY - 2015 DA - 2015// TI - Chip formation characterization and TEM investigation of worn PCBN tool during hard turning JO - Machining Sci Technol VL - 19 UR - https://doi.org/10.1080/10910344.2015.1051542 DO - 10.1080/10910344.2015.1051542 ID - Sobiyi2015 ER - TY - JOUR AU - Suresh, R. AU - Basavarajappa, S. PY - 2014 DA - 2014// TI - Effect of process parameters on tool wear and surface roughness during turning of hardened steel with coated ceramic tool JO - Procedia Mater Sci VL - 5 UR - https://doi.org/10.1016/j.mspro.2014.07.464 DO - 10.1016/j.mspro.2014.07.464 ID - Suresh2014 ER - TY - JOUR AU - Suresh, R. AU - Basavarajappa, S. AU - Gaitonde, V. N. AU - Samuel, G. L. PY - 2012 DA - 2012// TI - Machinability investigations on hardened AISI 4340 steel using coated carbide insert JO - Int J Refract Met Hard Mater VL - 33 UR - https://doi.org/10.1016/j.ijrmhm.2012.02.019 DO - 10.1016/j.ijrmhm.2012.02.019 ID - Suresh2012 ER - TY - JOUR AU - Tamizharasan, T. AU - Selvaraj, T. AU - Haq, A. N. PY - 2006 DA - 2006// TI - Analysis of tool wear and surface finish in hard turning JO - Int J Adv Manuf Technol VL - 28 UR - https://doi.org/10.1007/s00170-004-2411-1 DO - 10.1007/s00170-004-2411-1 ID - Tamizharasan2006 ER - TY - JOUR AU - Thamizhmanii, S. AU - Hasan, S. PY - 2012 DA - 2012// TI - Machinability study using chip thickness ratio on difficult to cut metals by CBN cutting tool JO - Key Eng Mater VL - 504 UR - https://doi.org/10.4028/www.scientific.net/KEM.504-506.1317 DO - 10.4028/www.scientific.net/KEM.504-506.1317 ID - Thamizhmanii2012 ER -